Drum Tuner

Drum Tuner guides

How to tune toms

Toms take three decisions: how even each head is, how the bottom head relates to the top, and how far apart the toms sit from each other.

1. Even out the top head

Take the tom off its mount and rest it on a towel so the bottom head is muffled. Finger-tighten every rod, then bring the head up in small equal turns, working across the drum. Tap an inch in from each rod and bring the low lugs up until every lug gives the same note.

2. Do the same on the bottom head

Flip the drum and even out the bottom head the same way. Then choose how it relates to the top:

3. Space the toms

Play the toms from high to low. Most kits sound good with neighbouring toms a third or a fourth apart (four or five semitones). If two toms sound too close, move the larger one down first. Every size has a range where it sounds full, so on a big kit you may have to squeeze the spacing a little.

4. Check on the mount

Put each tom back on its mount or legs and play it. A tom that sounded good on the towel and dies on the mount usually has a mount pressing on the shell, not a tuning problem.

Starting pitches by tom size

These are the starting ranges Drum Tuner uses for the pitch of the whole drum, top to bottom of what each size does well.

Rack and floor tom starting ranges
Head sizeDrum pitch, low to highNearest notes
8"180 to 260 HzF#3 to C4
10"145 to 210 HzD3 to G#3
12"120 to 175 HzB2 to F3
13"110 to 160 HzA2 to D#3
14"95 to 140 HzF#2 to C#3
15"85 to 125 HzF2 to B2
16"75 to 112 HzD2 to A2
18"62 to 92 HzB1 to F#2

Tune the whole rack without guessing

Drum Tuner listens while you tap near each lug and tells you which rod to turn and which way, until the head is even and at the pitch you picked. Your first complete drum is free, both heads included.

Download on the App Store

More: how to tune a snare drum · how to tune a kick drum · pitch chart by drum size